Novamatic FH68-VCU Bedienungsanleitung PDF herunterladen (Seite 17)

Notes on cleaning

• Clean the front of the appliance with a

soft cloth with warm water and a

cleaning agent.

• To clean metal surfaces, use a usual

cleaning agent.

• Clean the appliance interior after each

use. Fat accumulation or other food

remains may result in a fire. The risk is

higher for the grill pan.

• Clean stubborn dirt with a special oven

cleaner.

• Clean all accessories after each use and

let them dry. Use a soft cloth with warm

water and a cleaning agent.

• If you have nonstick accessories, do not

clean them using aggressive agents,

sharp-edged objects or a dishwasher. It

can cause damage to the nonstick

coating.

Stainless steel or aluminium

appliances

Clean the oven door with a wet

sponge only. Dry it with a soft

cloth.

Do not use steel wool, acids or

abrasive materials as they can

damage the oven surface. Clean

the oven control panel with the

same precautions.

Removing the shelf supports

To clean the oven, remove the shelf

supports.

1. Pull the front of the shelf support away

from the side wall.

2. Pull the rear end of the shelf support

away from the side wall and remove it.

2

1

Install the shelf supports in the opposite

sequence.

Removing and installing the

oven glass panels

You can remove the internal glass panels to

clean it. The number of glass panels is

different for different models.

WARNING! Keep the oven door

slightly open during the cleaning

process. When you open it fully

it may accidentally close causing

potential damage.

WARNING! Do not use the

appliance without the glass

panels.

1. Open the door until it is at an angle of

approximately 30°. The door stands

alone when slightly open.

30°

2. Hold the door trim (B) at the top edge of

the door on both sides and push

inwards to release the clip seal.

17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare